Date: 08/15/86 From: Tom Brady Re : PBBS and the 'Q'uit command -- User statistics not shown Ever since incorporating the fix which would keep NUBYE from multiple loading of PBYE.COM when certain conditions were just right (a special fix was also required in PBYE.MAC as well), an odd quirk appeared. The user's were always shown there statistics when exiting through CP/M with the 'BYE' command, but 99% of the time, when disconnecting through PBBS via the 'Q'uit command carrier would just drop without displaying any system statistics whatsoever. This fix was a simple one -- look for the label ANSW: and go down a few lines until you find XRA A and three flags being reset -- add the line as shown below: XRA A ; Make sure line feeds are off STA LFEEDS STA CDOFF ; Limit for waiting for c/r STA FKFLAG ; F-Key lead-in flag new line ==>> STA TWIT ; Twit status flag That's all there is to this fix -- I have already made the fix in the current v1.01 libraries found on my system (i.e. NUBYE101 and NUB101-S) -- this does not necessitate a new version number, hence this fix file.