4-Apr-87 23:04:52-MST,540;000000000000 Return-Path: Received: from CHARON (CHARON.MIT.EDU.#Internet) by SIMTEL20.ARPA with TCP; Sat 4 Apr 87 23:04:39-MST Received: by CHARON (5.45/4.7) id AA01403; Sun, 5 Apr 87 01:03:40 EST Date: Sun, 5 Apr 87 01:03:40 EST Message-Id: <8704050603.AA01403@CHARON> From: Robert S. French Sender: rfrench@athena.MIT.EDU To: northstar-users@simtel20.arpa Subject: Deletion Please delete french#robert%d@LLL-MFE (or equivalent) from your mailing list. Thank you -- Robert French 16-Apr-87 05:46:35-MDT,711;000000000000 Return-Path: Received: from LANL.GOV by SIMTEL20.ARPA with TCP; Thu, 16 Apr 87 05:46:10 MDT Received: by LANL.GOV (1.2/5.17) id AA01902; Wed, 15 Apr 87 21:36:37 mdt Date: Wed, 15 Apr 87 21:36:37 mdt From: dzzr@LANL.GOV (Douglas J Roberts) Message-Id: <8704160336.AA01902@LANL.GOV> To: northstar-users@simtel20.ARPA Subject: Parallel cable pinout for Epson MX-80 Cc: dzzr@LANL.GOV Yo, N* users. Does anybody out there know what the pin assigments are for an Epson MX-80? The N* has a 15-pin femal D-connector on its parallel output port, and the Epson has a 36-pin female (Centronics compatible?) parallel connector. Any help will be greatly appreciated! Doug Roberts. 16-Apr-87 11:47:22-MDT,924;000000000000 Return-Path: Received: from mcnc.mcnc.org ([128.109.131.1].#Internet) by SIMTEL20.ARPA with TCP; Thu, 16 Apr 87 11:47:03 MDT Received: from ecsvax (ecsvax.ncecs.edu) by mcnc.mcnc.org (5.54/MCNC/1-2-87) id AA25893; Thu, 16 Apr 87 13:47:09 EDT Received: by ecsvax (4.12/4.7) id AA01971; Thu, 16 Apr 87 13:44:13 est Date: Thu, 16 Apr 87 13:44:13 est From: Ted Emigh Message-Id: <8704161844.AA01971@ecsvax> To: northstar-users@simtel20.arpa Subject: Re: Parallel cable pinout for Epson MX-80 I have used the following connections for an MX-70 (which is supposed to be compatible). NorthStar Pin # Epson MX-70 Pin # 1 9 2 7 3 Ground 4 4 5 2 6 No Connection 7 10 8 1 9 8 10 6 11 5 12 3 13 Ground 14 Ground 15 Ground I have connected all my grounds with pins 16, 19-30 and 33 on the Printer. --Ted Emigh-- 16-Apr-87 21:42:27-MDT,593;000000000000 Return-Path: Received: from LANL.GOV by SIMTEL20.ARPA with TCP; Thu, 16 Apr 87 21:42:23 MDT Received: by LANL.GOV (1.2/5.17) id AA05120; Thu, 16 Apr 87 21:41:29 mdt Date: Thu, 16 Apr 87 21:41:29 mdt From: dzzr@LANL.GOV (Douglas J Roberts) Message-Id: <8704170341.AA05120@LANL.GOV> To: northstar-users@simtel20.ARPA Subject: Re: Parallel cable pinout for Epson MX-80 Thanks, Ted. That was what I was looking for. I'll try it tonight. --Doug (Apologies for using the group mailing list to respond: our mailer wasn't able to decipher the return path...)