Switch settings for the DEC LA50 printer. Factory settings (USA) 1=Closed and 0=Opened: 8 7 6 5 4 3 2 1 ----------------- SW1 | | | | | | | | | |0|0|0|0|0|0|0|0| ----------------- 8 7 6 5 4 3 2 1 ----------------- SW2 | |1| | | | | | | |0| |0|0|0|0|0|0| ----------------- Country character set: SW1 country 4 3 2 1 ----------------------- USA 0 0 0 0 (factory) England 0 0 0 1 Finland 0 0 1 0 France 0 0 1 1 French Canada 0 1 0 0 Germany 0 1 0 1 Italy 0 1 1 0 Japan 0 1 1 1 Norway/Denmark 1 0 0 0 Spain 1 0 0 1 Sweden 1 0 1 0 Number of horizontal dots: SW1 relation b/h dots/cm 5 ------------------------- 2 to 1 57 0 (factory) 2.5 to 1 71 1 Communication protocol: SW1 Protocol 6 ----------------- XON/XOFF 0 (factory) Ready/Busy 1 SW1 Signal level 7 ----------------- Busy=high 0 (factory) Ready=low Busy=low 1 Ready=high Long rows printout: SW1 Work mode 8 ----------------- Truncate 0 (factory) cont.next row 1 Communication speed: SW2 speed 3 2 1 --------------------- 4800 Baud 0 0 0 (fatcory) 2400 Baud 0 1 0 1200 Baud 1 1 0 600 Baud 0 0 1 300 Baud 1 0 1 200 Baud 0 1 1 110 Baud 1 1 1 Data format: SW2 data format 6 5 4 ----------------------------- 7 bit odd parity 1 1 0 7 bit even parity 1 1 1 7 bit mark (8=low) 1 0 0 7 bit space (8=high) 1 0 1 8 bit odd parity 0 1 0 8 bit even parity 0 1 1 8 bit no parity 0 0 0 (factory) SW2: 7 and 8 not used.